Differential primary gearset gear kit AW TF-60SN 09G (gear ratio 61/15, intermediate shaft bearings 17/23 rollers)

Before buying a kit, pay special attention and compare the gears of your transmission with the gears presented on the site according to the following main parameters:

• Number of gear teeth
• Gear outer diameter
• Notches on gear parts of gears
• Number of rollers on taper radial bearings of the intermediate shaft

Transmission output gear (with support):

• The number of teeth is 53 pcs.
• The number of notches is 5 pcs.

Differential ring gear:

• The number of teeth is 61 pcs.
• The number of notches is 4 pcs.

Intermediate shaft:

• The total shaft height is 160 mm.

Countershaft bearings:

• Tapered radial bearing (large) - 23 rollers.
• Tapered radial bearing (small) - 17 rollers.

Gear 48 teeth:

• The number of notches on the gear is 4 pcs.
• The outer diameter of the gear is 129 mm.
• The width of the gear is 23.20 mm.

Gear 15 teeth:

• The number of notches on the gear is 2 pcs.
• The outer diameter of the gear is 56 mm.

Parking gear:

• The number of teeth is 13 pcs.